I CREATE FOR
Blinkies
Grab My Blinkie
Monday, December 23, 2013
Christmas Crimbo
Christmas Crimbo
I used the wonderful artwork of Ismeal Rac
You can purchase tube here:RAC
Scrapkit used "Crimbo" By HungryHill
You can purchase it here: Treasured Scraps
1. Open new image 600 X 600
2. Floodfill with paper1. Load saved mask and merge group
3. Add new layer and floodfill with paper 2. Load saved mask and merge group
4. Copy and paste glitter scatter
5. Copy and paste frame 4. Resize to your liking and place in the middle of your image
6. Grab your magic wand and click inside your frame and floodfill with paper 3
7. Copy and paste your tube as new layer. Resize to your liking and place in the middle of your frame layer
8. Copy and paste beads. Resize and place under your frame layer
9. Copy and paste gift 2. Resize to your liking and place on the left hand side of your frame
10. Copy and paste gift 1. Resize to your liking and place in front of gift 1
11. Copy and paste gift 4. Resize to your liking and place on the right hand side of your gift 2
12. Copy and paste gift 3. Resize to your liking and place in front of other gifts
13. Copy and paste berries. Resize to your liking and place under gift4 in the middle of your beads layer
14. Copy and paste bow 7. Resize to your liking and place on the upper left hand corner of your frame
15. Copy and paste trim 2. Resize to your liking and place over the right hand side of your beads. Go Image/Flip
16. Copy and paste poinsettas. Resize to your liking and place in front of your trim
17. Copy and paste candy cane 1. Resize to your liking and place in front of gifts on the right hand side
18. Copy and paste candy cane 2. Resize to your liking and place in front of gifts on the left hand side
19. Add Copyright info and text
20. Merge visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written December 2013 by me(Koolbrat) any similarities to another is just a coincidence.
Tuesday, October 1, 2013
Green Zombie
Green Zombie
I am using "Zombie Chick" by Wendy Gerber
You can purchase it here: SATC
Scrapkit "WitchyPoo" by Black Widow Creations
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper PP4. Load saved mask and merge group
3. Add new layer and floodfill with paper PP6. Load saved mask and merge group
4. Copy and paste the moon. Resize and place in the upper right hand corner of your image. Add drop shadow of your
choice
5. Copy and paste frame 15. Resize and place in the middle of your image
6. Grab your magic wand and click inside your frame
7. Floodfill with paper PP9
8. Copy and paste your tube as new layer. Duplicate and X out the copy
9. Go Selections/ Invert/ Delete/Select None
10. UnX your copy and grab your eraser tool and erase everything that you don't want showing
11. Copy and paste the tombstone. Resize and place in the lower right hand corner of your image
12. Copy and paste grass. place in the lower right hand corner of your image
13. Copy and paste reaper. Resize and place in the lower left hand corner of your image
14. Copy and paste cauldron. Resize and place in front of your reaper
15. Copy and paste black cat. Resize and place in the middle of the bottom half of your image
16. Add your copyright info and Text
17. Merge visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written October 2013 by me(Koolbrat) any similarities to another is just a coincidence.
I am using "Zombie Chick" by Wendy Gerber
You can purchase it here: SATC
Scrapkit "WitchyPoo" by Black Widow Creations
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper PP4. Load saved mask and merge group
3. Add new layer and floodfill with paper PP6. Load saved mask and merge group
4. Copy and paste the moon. Resize and place in the upper right hand corner of your image. Add drop shadow of your
choice
5. Copy and paste frame 15. Resize and place in the middle of your image
6. Grab your magic wand and click inside your frame
7. Floodfill with paper PP9
8. Copy and paste your tube as new layer. Duplicate and X out the copy
9. Go Selections/ Invert/ Delete/Select None
10. UnX your copy and grab your eraser tool and erase everything that you don't want showing
11. Copy and paste the tombstone. Resize and place in the lower right hand corner of your image
12. Copy and paste grass. place in the lower right hand corner of your image
13. Copy and paste reaper. Resize and place in the lower left hand corner of your image
14. Copy and paste cauldron. Resize and place in front of your reaper
15. Copy and paste black cat. Resize and place in the middle of the bottom half of your image
16. Add your copyright info and Text
17. Merge visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written October 2013 by me(Koolbrat) any similarities to another is just a coincidence.
Monday, September 30, 2013
Haunted Nights
Haunted Nights
I am using "Little Dark" by Sebastien Serrano
You can purchase it here: SATC
Scrapkit "LIttle Dark" by Hania Designz
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper 3. Resize 85%
3. Copy and paste moon. Resize and place in the upper left hand corner of your image. Add drop shadow of your choice
4. Copy and paste golden frame. Resize and place in the middle of your image
5. Copy and paste your tube. Resize so that she fits in your frame
6. Copy and paste tree 05. Resize and place in the lower left hand corner of your image
7. Copy and paste candle stick 66. Resize and place in the lower right hand corner of your image
8. Copy and paste pond 56. Resize and place in front of your frame
9. Copy and paste books 17. Resize and place in front of your candle stick
10. Copy and paste dead grass 04. Resize and place in front of your tree
11. Copy and paste potion 26. Resize and place next to your books
12. Copy and paste cauldron 35. Resize and place in front of your books
13. Copy and paste wolf 16. Resize and place in front of your tree and grass
14. Copy and paste mist 10. Resize and place over your water
15. Add your copyright info and Text
16. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
I am using "Little Dark" by Sebastien Serrano
You can purchase it here: SATC
Scrapkit "LIttle Dark" by Hania Designz
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper 3. Resize 85%
3. Copy and paste moon. Resize and place in the upper left hand corner of your image. Add drop shadow of your choice
4. Copy and paste golden frame. Resize and place in the middle of your image
5. Copy and paste your tube. Resize so that she fits in your frame
6. Copy and paste tree 05. Resize and place in the lower left hand corner of your image
7. Copy and paste candle stick 66. Resize and place in the lower right hand corner of your image
8. Copy and paste pond 56. Resize and place in front of your frame
9. Copy and paste books 17. Resize and place in front of your candle stick
10. Copy and paste dead grass 04. Resize and place in front of your tree
11. Copy and paste potion 26. Resize and place next to your books
12. Copy and paste cauldron 35. Resize and place in front of your books
13. Copy and paste wolf 16. Resize and place in front of your tree and grass
14. Copy and paste mist 10. Resize and place over your water
15. Add your copyright info and Text
16. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
Killer on the Loose
Killer on the Loose
I am using "Sexy Killer" by Irmino Pin-oops
You can purchase it here: SATC
Scrapkit "Sexy Killer" by Hania Designz
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper 7. Load saved mask and merge group
3. Copy and paste element 24
4. Copy and paste frame 100. Resize and place in the middle of your image
5. Grab your magic wand and click inside the frame
6. Floodfill with paper 2 select none
7. Copy and paste your tube so that it looks like she is in the frame
8. Copy and paste element 05. Resize and place in the lower left hand corner of your image
9. Copy and paste element 25. Resize and place at the top of your frame
10. Copy and paste element 57. Resize and place in the lower left hand corner of your image
11. Copy and paste element 69. resize and place next to your skull
12. Copy and paste element 28. Resize and place in the lower right hand corner of your image
13. Copy and paste element 84. Resize and place in the lower right hand corner of your image
14. Copy and paste element 65. Resize and place so that it looks like it is climbing down your money stack
15. Add your copyright info and Text
16. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
I am using "Sexy Killer" by Irmino Pin-oops
You can purchase it here: SATC
Scrapkit "Sexy Killer" by Hania Designz
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper 7. Load saved mask and merge group
3. Copy and paste element 24
4. Copy and paste frame 100. Resize and place in the middle of your image
5. Grab your magic wand and click inside the frame
6. Floodfill with paper 2 select none
7. Copy and paste your tube so that it looks like she is in the frame
8. Copy and paste element 05. Resize and place in the lower left hand corner of your image
9. Copy and paste element 25. Resize and place at the top of your frame
10. Copy and paste element 57. Resize and place in the lower left hand corner of your image
11. Copy and paste element 69. resize and place next to your skull
12. Copy and paste element 28. Resize and place in the lower right hand corner of your image
13. Copy and paste element 84. Resize and place in the lower right hand corner of your image
14. Copy and paste element 65. Resize and place so that it looks like it is climbing down your money stack
15. Add your copyright info and Text
16. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
Halloween Monsters
Halloween Monsters
I am using "Tabitha" by Keith Garvey
You can purchase it here: Garv
Scrapkit "Howl O ween" by Waggish Sparkles
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper 17. Load saved mask and merge group
3. Copy and paste wire. Resize and place in the middle of your image
4. Duplicate wire and flip
5. Copy and paste frame 2. Resize and place in the middle of your image
6. Grab your magic wand and click inside your frame
7. Copy and paste tube as new layer. Resize and place then duplicate your tube and X the copy out
8. Go selections/invert/delete select none
9. UnX your copy and take your eraser tool and clean up the extra tube over lapping your frame
10. Copy and paste boo. Resize and place at the bottom of your frame
11. Copy and paste the web. Resize and place in the top left hand corner of your frame
12. Copy and paste pumpkins. Resize and place on the left hand side of your frame
13. Copy and paste cauldron. Resize and place in the lower right hand corner of your image
14. Copy and paste candy corn 2. Resize and place at the bottom of your image
15. Copy and paste skull. Resize and place next to your pumpkins
16. Copy and paste monster3. Resize and place in the middle of the bottom of your image
17. Copy and paste candy corn3. Resize and place on top of the other candy
18. Copy and paste sparkle 1
19. Add your copyright info and Text
20. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
I am using "Tabitha" by Keith Garvey
You can purchase it here: Garv
Scrapkit "Howl O ween" by Waggish Sparkles
You can purchase it here: SATC
1. Open new image 600 X 600
2. Floodfill with paper 17. Load saved mask and merge group
3. Copy and paste wire. Resize and place in the middle of your image
4. Duplicate wire and flip
5. Copy and paste frame 2. Resize and place in the middle of your image
6. Grab your magic wand and click inside your frame
7. Copy and paste tube as new layer. Resize and place then duplicate your tube and X the copy out
8. Go selections/invert/delete select none
9. UnX your copy and take your eraser tool and clean up the extra tube over lapping your frame
10. Copy and paste boo. Resize and place at the bottom of your frame
11. Copy and paste the web. Resize and place in the top left hand corner of your frame
12. Copy and paste pumpkins. Resize and place on the left hand side of your frame
13. Copy and paste cauldron. Resize and place in the lower right hand corner of your image
14. Copy and paste candy corn 2. Resize and place at the bottom of your image
15. Copy and paste skull. Resize and place next to your pumpkins
16. Copy and paste monster3. Resize and place in the middle of the bottom of your image
17. Copy and paste candy corn3. Resize and place on top of the other candy
18. Copy and paste sparkle 1
19. Add your copyright info and Text
20. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
Sunday, September 29, 2013
Cherry Halloween
Cherry Halloween
I am using "LaunchingFreebie1" by Ninaste
You can purchase it here: BHS
Scrapkit "Halloween Party" by Hania Designz
You can purchase it here: SATC
I am using "LaunchingFreebie1" by Ninaste
You can purchase it here: BHS
Scrapkit "Halloween Party" by Hania Designz
You can purchase it here: SATC
This tube is a freebie if you spend $5 or more at the
Grand Opening of The BeeHive Studio Oct. 1st thru Oct. 5th
1. Open new image 600 X 600
2. Copy and paste paper 09. Load saved mask and merge group
3. Copy and paste element 16. Place on the right hand side of your image
4. Copy and paste element 100. Resize and place in the middle of your image
5. Grab you magic wand and click inside your frame
6. Copy and paste your tube as new layer. Resize and place to your liking
7. Duplicate your tube and X it out
8. On your orginal layer go Selections/Invert/Delete then Selct none
9. UnX your copy and grab your eraser tool and erase the excess tube
10. Grab your magic wand one more time and Click in the blank areas of your frame. You can select multiple areas by hitting shift at the same time that you click where you want to select
11. Floodfill with paper 1
12. Copy and paste element 62. Resize and place in the lower right hand corner of your image
13. Copy and paste element 09. Resize and place next to element 62
14. Copy and paste element 28. Resize and place in the lower right hand corner of your image
15. Copy and paste element 15. Resize and place on the left hand side of your frame
16. Copy and paste element 95. Resize and place in the lower left hand corner of your image
17. Copy and paste element 57. Resize and place in the lower left hand corner of your image
18. Add your copyright info and Text
19. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
1. Open new image 600 X 600
2. Copy and paste paper 09. Load saved mask and merge group
3. Copy and paste element 16. Place on the right hand side of your image
4. Copy and paste element 100. Resize and place in the middle of your image
5. Grab you magic wand and click inside your frame
6. Copy and paste your tube as new layer. Resize and place to your liking
7. Duplicate your tube and X it out
8. On your orginal layer go Selections/Invert/Delete then Selct none
9. UnX your copy and grab your eraser tool and erase the excess tube
10. Grab your magic wand one more time and Click in the blank areas of your frame. You can select multiple areas by hitting shift at the same time that you click where you want to select
11. Floodfill with paper 1
12. Copy and paste element 62. Resize and place in the lower right hand corner of your image
13. Copy and paste element 09. Resize and place next to element 62
14. Copy and paste element 28. Resize and place in the lower right hand corner of your image
15. Copy and paste element 15. Resize and place on the left hand side of your frame
16. Copy and paste element 95. Resize and place in the lower left hand corner of your image
17. Copy and paste element 57. Resize and place in the lower left hand corner of your image
18. Add your copyright info and Text
19. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
Bee Anyone
Bee Anyone
I am using "LaunchingFreebie2" by Derzi
You can purchase it here: BHS
Scrapkit "Halloween Party" by Hania Designz
You can purchase it here: SATC
I am using "LaunchingFreebie2" by Derzi
You can purchase it here: BHS
Scrapkit "Halloween Party" by Hania Designz
You can purchase it here: SATC
This tube is a freebie if you spend $5 or more during the Grand Opening of
The Beehive Studio Oct. 1st thru Oct 5th
1. Open new image 600 X 600
2. Floodfill with paper 07. Load saved mask and merge group
3. Copy and paste element 46. Resize to your liking and place in the middle of your image
4. Copy and paste element 94. Resize and place in the middle of your image
5. Grab your magic wand and click inside the frame
6. Paste your tube as new layer. Resize and place to your liking
7. Duplicate your tube and X it out
8. Make sure you are on the orginal layer and go Selections/Invert/Delete. Select none
9. UnX the copy and take your eraser tool and erase the extra tube that is over lapping your frame
10. Copy and paste element 88. Place in the lower left hand corner of your image
11. Copy and paste element 73. Resize and place in front of your bubbles
12. Copy and paste element 40. Resize and place in front of halloween bag
13. Copy and paste element 47. Resize and place in front of your candle
14. Copy and paste element 42. Resize and rotate 15 degrees to the right. Place so that it looks like it is sitting against your candle
15. Copy and paste element 17. Resize and place in the lower left hand corner of your image
16. Copy and paste element 27. Resize and place over the light in the right hand corner
17. Copy and paste element 68. Resize and place in the lower right hand corner of your image
18. Copy and paste element 37. Resize and place in the middle of the lower part of your image
19. Add your copyright info and Text
20. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
1. Open new image 600 X 600
2. Floodfill with paper 07. Load saved mask and merge group
3. Copy and paste element 46. Resize to your liking and place in the middle of your image
4. Copy and paste element 94. Resize and place in the middle of your image
5. Grab your magic wand and click inside the frame
6. Paste your tube as new layer. Resize and place to your liking
7. Duplicate your tube and X it out
8. Make sure you are on the orginal layer and go Selections/Invert/Delete. Select none
9. UnX the copy and take your eraser tool and erase the extra tube that is over lapping your frame
10. Copy and paste element 88. Place in the lower left hand corner of your image
11. Copy and paste element 73. Resize and place in front of your bubbles
12. Copy and paste element 40. Resize and place in front of halloween bag
13. Copy and paste element 47. Resize and place in front of your candle
14. Copy and paste element 42. Resize and rotate 15 degrees to the right. Place so that it looks like it is sitting against your candle
15. Copy and paste element 17. Resize and place in the lower left hand corner of your image
16. Copy and paste element 27. Resize and place over the light in the right hand corner
17. Copy and paste element 68. Resize and place in the lower right hand corner of your image
18. Copy and paste element 37. Resize and place in the middle of the lower part of your image
19. Add your copyright info and Text
20. Merge Visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.
This tutorial was written September 2013 by me(Koolbrat) any similarities to another is just a coincidence.
Subscribe to:
Posts
(Atom)