Cupid's Motivation


            I am using "Robin" by Keith Garvey
             You can purchase it here: Garv
                          Scrapkit "Cupids Wishes" by Waggish Sparkles
               You can purchase it here: SATC



1. Open new image 600 X 600
2. Floodfill with paper10. Load saved mask and merge group
3. Add new layer and floodfill with paper 5. Load saved mask and merge group
4. Copy and paste splatter. Resize to your liking and place in the middle of your image
5. Copy and paste frame. Resize to your liking and place in the middle of your image
6. Grab your magic wand and click inside all of your frame pieces. You can do this by clicking one and then holding the shift key while you click inside the others
7. Copy and paste your tube into selection. Select none
8. Copy and paste rose. Resize to your liking and place in the middle of the lower half of your image
9. Copy and paste cat2. Resize to your liking and place on the left hand side of your rose
10. Copy and paste diamond. Resize to your liking rotate 30 degree to the left. Place in the upper left hand corner of your image
11. Copy and paste hearts with halo. Resize to your liking and rotate 30 degrees to the right. Place in the upper right hand corner of your image
12. Copy and paste champagne. Resize to your liking and place in the lower left hand corner of your image
13. Copy and paste corset. Resize to your liking and place in the lower right hand corner of your image
14. Copy and paste chocolate box. Resize to your liking and place in front of your champagne bottle
15. Copy and paste candle. Resize to your liking and place in front of your chocolate box
16. Copy and paste  champagne glass. Resize to your liking and place in front of your chocloate box next to your candle
17. Copy and paste love skull. Resize to your liking and place in front of your corset
18. Copy and paste shoe. Resize to your liking and place on the right hand side of your cat
19. Copy and paste nail polish. Resize to your liking and place oh the left hand side of your skull
20. Copy and paste lipstick. Resize to your liking and place on the right hand side of your skull
21. Copy and paste petal4. Resize to your liking and place in front of champagne glass
22. Duplicate petal4. Move in front nail polish
23. Duplicate petal4 again and move in front of your shoe
24. Copy and paste petal5. Resize to your liking and place in front of your candle
25. Duplicate petal 5 and move in front of your skull
26. Duplicate petal 5 again and move in front of your glass
27. Copy and paste glitter2
28. Copy and paste glitter4
29. Add your copyright info and Text
30. Merge visible and Save


That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written August 2013 by me(Koolbrat) any similarities to another is just a coincidence.
 

 

Jinx Attitude


            I am using "Megan1" by Jose Cano
         You can purchase it here: SATC
                                Scrapkit "Naughty Jinx" by MistyLynn Creation's
           You can purchase it here: SATC



1. Open new image 600 X 600
2. Floodfill with paper 06. Load saved mask and merge group
3. Add new layer and floodfill with paper 04. Load saved mask and merge group
4. Copy and paste glitter2. Resize to your liking and place in the lower right hand corner of your image
5. Copy and paste glitter 01. Resize to your liking and place in the lower left hand corner of your image
6. Copy and paste frame 02. Resize to your liking and place in the middle of your image
7. Grab your magic wand and click inside your frame
8. Copy and paste your tube as new layer. Resize and place to your liking
9. Duplicate your tube layer and make sure that you are clicked on the orginal tube layer
10. Go Selcetions/ Invert/ Delete
11. Click on your duplicate and take your eraser tool and erase the part of your tube that is showing above your frame
12.Copy and paste shoe1. Resize to your liking and place in the lower right hand corner of your image
13. Copy and paste nighty. Resize to your liking and place in the lower left hand corner of your image
14. Copy and paste boot 02. Resize and place in the lower right hand corner of your image
15. Copy and paste bottle. Resize and place next to the boot
16. Copy and paste lipstick. Resize and place in front of your nighty
17. Copy and paste shoe2. Resize and place in front of your lipstick
18. Copy and paste lips01. Resize and place in front of your shoe
19. Copy and paste drink01. Resize and place next to your shoe in the right hand corner
20. Copy and paste drink 02. Resize and place next to the first drink
21.Copy and paste jinx mix. Resize and place next to the second drink
22. Copy and paste wordart. Resize and place over your drinks
23. Add your copyright info and Text
24. Merge visible and Save
That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written August 2013 by me(Koolbrat) any similarities to another is just a coincidence.


 

 

 Melanie's Passion


            I am using "Candy" by Jamie Kidd
       You can purchase it here: CDO
                      Scrapkit "Purple Passion" by Tiny Turtles
         You can purchase it here: SATC




1. Open new image 600 X 600
2. Floodfill with paper 19. Load saved mask and merge group
3. Add new layer and floodfill with paper 24. Load saved mask and merge group
4. Copy and paste element 8
5. Copy and paste element 78. Resize to your liking and place in the middle of your image
6. Grab your magic wand and click inside element 78
7. Copy and paste your tube. Resize to your liking and place where you want it
8. Duplicate your tube and X it out
9. Go selections/Invert/Delete
10. UNX your duplicate and use your eraser and erase the extra that is over lapping your frame layer
11. Copy and paste element 97. Resize to your liking and place in the lower left hand corner of your image
12. Copy and paste element 100. Resize to your liking and place next to your gifts
13. Copy and paste element 99. Resize to your liking and place in the lower right hand corner of your image
14. Copy and paste element 67. Resize to your liking and place in front of your violin
15. Copy and paste element 14. Resize to your liking and place in front of your fan layer
16. Copy and paste element 63. Resize to your liking and place in front of your jar
17. Copy and paste element 11. Resize to your liking and place in the lower left hand corner of your image
18. Copy and paste element 98. Resize to your liking and place on the left hand side of your image
19. Copy and paste element 88. Resize to your liking and place in the lower middle of your image
20. Add your copyright info and Text
21. Merge visible and Save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written August 2013 by me(Koolbrat) any similarities to another is just a coincidence.

 

 Muzik Lover


            I am using "Rock On" by Keith Garvey
    You can purchase it here: Garv
                    Scrapkit "Hot Muzik" by Evol Angel Scraps

 You can purchase it here: Sweet Pinup, Scraps Candy


1. Open new image 600 X 600
2. Floodfill with paper9. Load saved mask and merge group
3. Add new layer and floodfill with paper 3. Load saved mask and merge group
4. Copy and paste beats. Resize to your liking and place in the lower middle of your image
5. Copy and paste city scape. Resize to your liking and place in the upper left hand corner of your image
6. Copy and paste flame. Resize to your liking and place in the lower right hand side of your image
7. Copy and paste musicnotes. Resize to your liking and place in the lower right hand side of your image
8. Copy and paste musicnote. Resize to your liking and place in the upper left hand corner of your image
9. Copy and paste musiccross. Resize to your liking and place in the lower right hand corner of your image
10. Copy and paste microphone. Resize to your liking and place in the lower right hand corner of your image
11. Copy and paste miniIpod. Resize to your liking and place next to the microphone
12. Copy and paste skullfly. Resize to your liking and place in front of your microphone layer
13. Copy and paste frame 2. Resize to your liking and place in the middle of your image
14. Grab your magic wand and click inside your frame
15. Copy and paste your tube as a new layer. Resize to your liking and place where you want.
16. Duplicate your tube layer and X it out
17. Go back to the orignal tube and go selections/ Invert
18. UnX the duplicate tube and earse the extra part of your tube that is showing above your frame
19. Copy and paste speakers. Resize to your liking and place in the lower left hand corner of your image
20. Copy and paste guitar. Resize to your liking and place in front of your speakers. Rotate 30 Degrees to the left
21. Copy and paste music note 2. Resize to your liking and place in the upper right hand corner of your image
22. Copy and paste nail polish. Resize to your liking and place in front of your guitar
23. Add your copyright info and Text
24. Merge visible and Save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written August 2013 by me(Koolbrat) any similarities to another is just a coincidence.

 

 Spookilious


            I am using "Lily Bug" by Derzi
                You can purchase it here: SATC
                       Scrapkit "Spookween" by Tiny Turtles
                You can purchase it here: SATC


1. Open new image 600 X 600
2. Floodfill with paper 11. Load saved mask and merge group
3. Add new layer and floodfill with paper 17. Load saved mask and merge group
4. Copy and paste element 67. Resize to your liking and place on the right hand side of your image
5. Copy and paste  your tube. Resize to your liking and place in the middle of your image
6. Copy and paste element 58. Resize to your liking and place in the upper left hand corner of your image
7. Copy and paste element 63. Resize to your liking and place in the upper right hand corner of your image
8. Copy and paste element 14. Resize to your liking and place in the lower right hand corner of your image
9. Copy and paste element 88. Resize to your liking and place in front of your leaf layer
10. Copy and paste element 91. Resize to your liking and place in the lower left hand corner of your image
11. Copy and paste element 92. Resize to your liking and place on top of your feather layer
12. Copy and paste element 114. Resize to your liking and place in front of the the candles
13. Copy and paste element 50. Resize to your liking and place in front of your bottle layer so that the spider looks like it is on the bottle and the candles
14. Add your copyright info and Text
15. Merge visible and Save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written August 2013 by me(Koolbrat) any similarities to another is just a coincidence.

 

 Tootie Cherry



            I am using "Bad and Good" by Keith Garvey
    You can purchase it here: Garv
        Scrapkit "Tootie Cutie" by MRS W
       You can purchase it here: Rockin Scraps



1. Open new image 600 X 600
2. Flood fill with paper style A. Load saved mask and merge group
3. Add new layer and floodfill with paper style D. Load saved mask and merge group
4. Copy and paste tree01. Resize to your liking and place in the middle of your image
5. Copy and paste frame02. Resize to your liking and rotate 90 degrees to the right. Place in front of your tree in the middle of your image
6. Grab your magic wand and click inside the top circle of your frame and floodfill with paper style C. Then copy and paste a piece of your tube
7. Grab your magic wand again and click inside the bottom cirlce and repeat number 6 but change the piece of tube
8. Copy and paste your tube and place to your liking
9. Copy and paste lollipop01. Resize to your liking and place on the right side of your tube
10. Copy and paste bug02. Resize to your liking and place on your frame
11. Copy and paste doodle01. Resize to your liking. Go image/mirror and place in the lower left hand corner of your image
12. Copy and paste cupcake02. Resize to your liking and place in front of your doodle
13. Copy and paste cupcake01. Resize to your liking and place on the left hand side of your other cupcake
14. Add your copyright info and Text
15. Merge visible and Save


That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written August 2013 by me(Koolbrat) any similarities to another is just a coincidence.

 

Toxic



            I am using "Roxxy" by KT Bryan
           You can purchase it here: CDO
                               Scrapkit "Toxic Love" by Scraps by Danielle
          You can purchase it here: SBD



1. Open new image 600 X 600
2. Floodfill with red(bd1f1f). Load saved mask and merge group
3. Add new layer and floodfill with black(000000). Load saved mask and merge group
4. Copy and paste beaded frame. Place in the middle of your image
5. Grab your magc wand and click inside of your frame
6. Copy and paste your tube and new layer
7. Duplicate your tube and move the original under your frame layer. X out the duplicate and make sure you are clicked on the orginal tube layer and go Selections/ Invert/ Delete
8. UnX your duplicate layer and use your earser tool to earse the parts of your tube that are showing above your frame layer that you don't want to show
9. Copy and paste heart with rose. Resize to your liking and place in the lower left hand corner of your image
10. Copy and paste bomb. Resize to your liking and place in front of your heart with rose
11. Copy and paste bad girl. Resize to your liking and place in the upper left hand corner of your image
12. Copy and paste nail pilish. Resize to your liking and place in front of the bomb layer
13. Copy and paste skull candy. Resize to your liking and place in the lower right hand corner of your image
14. Copy and paste rose skull. Resize to your liking and place in front of your skull layer
15. Copy and paste ppoison bottle. Resize to your liking and place next to the nail polish layer
16. Copy and paste toxic bottle. Resize to your liking and place on the right hand side of your poison bottle
17. Copy and paste knife. Resize to your liking and place in the middle of the lower part of your image. Go Image/ Mirror/ Image/ Flip
18. Add your copyright info and Text
19. Merge visible and Save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written August 2013 by me(Koolbrat) any similarities to another is just a coincidence.