Garden Paradise

Secret Garden comes in 2 parts so make sure purchase both parts

 

Rebal Madness


            I am using the amazing artwork of Keith Garvey
       You can purchase it here: Garv
             Scrapkit "Rebal Rider" by MistyLynn's Creations
                   You can also purchase it here: Scrap Candy


1. Open new image 600 X 600
2. Floodfill with paper10. Load saved mask and merge group
3. Copy and paste element48. Resize and place on the left hand middle of your image
4. Duplicate and mirror
5. Copy and paste element24. Resize and flip. Place in the lower half of your image
6. Copy and paste element37. Resize and place in the middle of your image
7. Grab your magic wand and click inside element 37. Copy and paste your tube into selection. Selections none
8. Copy and paste element52. Resize and place in the upper left hand corner of your image
9. Copy and paste element61. Resize and place in the lower right hand corner of your image
10. Copy and paste element09. Resize and place on the left hand side of your frame
11. Copy and paste element17. Resize and place in the lower right hand corner of your image
12. Copy and paste element33. Resize and place next to your speakers
13.Copy and paste element26. Resize and place under your music notes
14. Copy and paste your tube. Resize and place in the lower left hand corner of your image
15. Copy and paste element13. Resize and place in the lower left hand corner of your image
16. Copy and paste element22. Resize and place over disco ball
17. Copy and paste element42. Resize and place on the right hand side of your heart
18. Add your copyright info and text
19. Mergevisible and save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.

 

Patty's Day Special


            I am using the amazing artwork of Vi Nina
         You can purchase it here: SNC
                       Matching Scrapkit "BibiIrishBeauty" by Bibi's Collection
                You can also purchase it here: SNC


1. Open new image 600 X 600
2. Floodfill with paper12. Load saved mask and merge group
3. Copy and paste element63. Resize and Mirror. Place in the upper left hand corner of your image
4. Copy and paste element46. Resize and place in the upper left hand corner just below element63
5. Copy and paste element73. Resize and Rotate 50 degrees to the right. Place on the right hand side of your image
6. Copy and paste element48. Resize and place in the middle of your image
7. Grab your magic wand and click inside each open frame
8. Floodfill with paper7
9. Copy and paste your tube into selection then click selections none
10.Copy and paste your tube. Resize and place oh the left hand side of your frame
11. Copy and paste element8. Resize and place in front of your tube
12. Copy and paste element68. Resize and place in the lower right hand corner of your image
13. Copy and paste element16. Resize and place under your rainbow
14. Copy and paste element40. Resize and mirror and place on the side of your pot of gold
15. Copy and paste element62. Place in front of your pot of gold
16. Copy and paste element15. Resize and place oh the right hand side of your hat
17. Copy and paste element9. Resize and place in front of your hat and date. Add drop shadow of your choice
18.  Copy and paste element25. Resize and place next to your ladder
19. Add your copyright info and text
20. Merge visible and Save



That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.

 

 

 

This Pack is being released  February 24th

You can purchase this Cluster Pack here

 

 Tattoo'd Bling


            I am using the amazing artwork of Ismael Rac
         You can purchase it here: Rac
           Scrapkit "Tattoo'd" by MistyLynn's Creations
                   You can also purchase it here: Scrap Candy


1. Open new image 600 X 600
2. Copy and paste MLC-Element2. Resize and place in the middle of your image
3. Copy and paste your tube. Resize and place in the middle of your frame. Duplicate tube and move orginal under frame

layer
4. On Orginal layer go Selections/Modify/Expand by 5/Invert/Delete then Selections none
5. Grab your eraser tool and erase everything that is above the frame that you don't want showing
6. Copy and paste MLC-Element30. Resize and place on the left hand side of your frame
7. Copy and paste MLC-Element11. Resize and place in the middle of the frame
8. Copy and paste MLC-Element6. Resize and place on the right hand side of your frame
9. Copy and paste MLC-Element15. Resize and place in front glass
10. Copy and paste MLC-Element8. Resize and place on left hand side of your glass
11. Copy and paste MLC-Element24. Resize and place over your glitter layeron the left hand side of your frame
12. Add your copyright info and text
13. Merge visible and Save


That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.

 

 Tea Time

             I am using the amazing artwork of NinasteOc
            This tube was given to me while I was on the Creative Team

 You can purchase it here: BHS
                   Scrapkit "ScrapHH_Go Ask Alice" by HungryHill
         You can also purchase it here: CDO


1. Open new image 600 X 600
2. Copy and paste ivy-circle. Resize and place in the middle of your image
3. Grab your magic wand and click inside the circle
4. Copy and paste your tube as new layer. Resize and place in the middle of your circle
5. Duplicate your tube and move the orginal under the circle layer
6. Make sure that your orginal tube layer is highlighted and go Selections/Modify/Expand by 5/Invert/Delete. Then

Selections None
7. Go to your duplicate layer and grab your eraser tool and erase everything that you don't want showing above your circle

layer
8. Copy and paste whiterabbit. Resize and place on the left hand side of your circle
9. Copy and paste teapot. Resize and place in the middle of your image
10. Copy and paste teacup. Resize and place on the left hand side of your teapot
11. Copy and paste Madhatter. Resize and place on the right hand side of your circle. Image mirror
12. Copy and paste cake. Resize and place on the left hand side of your MadHatter
13. Copy and paste berries. Resize and place in front of your teapot
14. Add your copyright info and Text
15. Merge visible and save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.

 

  Evil Nights


            I am using the amazing artwork of Keith Garvey
             You can purchase it here: Garv
                Scrapkit "A Dark Night" by MistyLynn's Creations
                   You can also purchase it here: Scrap Candy



1. Open new image 600 X 600
2. Copy and paste element 47. Place in the middle of your image
3. Copy and paste element 56. Resize and place in the upper right hand corner of your image. Add drop shadow of your

choice
4. Copy and paste element 03. Place in the middle of your image
5. Grab your magic wand and click inside your frame
6. Copy and paste your tube as new layer. Place and duplicate. Move orginal under your frame layer
7. Make sure that your orginal tube layer is highlighted and go Selctions/Modify/Expand by 5/ Invert/Delete Selections none
8. Make sure that your duplicate layer is highlighted and grab your eraser and erase everything above your frame that you

don't want showing
9. Copy and paste element 71. Resize and place on the left hand side of your frame
10. Copy and paste element 64. Resize and place in the middle of your the bottom part of your frame
11. Copy and paste element 68. Resize and place on one of the pages of your book
12. Copy and paste element57. Resize and place on the right hand side of your frame
13. Copy and paste element 54. Resize and place over the bottom part of your candle holder
14. Copy and paste element 10. Resize and place on your frame some where
15. Add your copyright info and text
16. Merge visible and save


That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comment.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.

 

 Paris Nights

            I am using the amazing artwork of Vi Nina
            You can purchase it here: SNC
                      Matching Scrapkit "Rossys Violin" by Bibi 's Collection
                You can also purchase it here: SNC



1. Open new image 600 X 600
2. Copy and paste elems45. Resize and place in the upper right hand corner of your image
3. Copy and paste elems16. Resize and place in the middle of your image
4. Grab your magic wand and click inside your frame layer
5. Copy and paste your tube as new layer. Resize and place to your liking. Duplicate and move the orginal under your

frame layer.
6. Make sure that your orginal is highlighted and go Selections/Modify/Expand by 5/ Invert/ Delete. Selections  none
7. On  your duplicated layer grab your eraser and erase anything that is showing above your frame that you don't want

showing
8. Copy and paste elems12. Resize and place on the lower left hand corner of your frame
9. Copy and paste elems35. Resize and place on top of your pillow
10. Copy and paste elems3. Resize and place next to your pillow
11. Copy and paste elems27. Resize and place in front of your purse layer
12. Copy and paste elems57. Resize and place on the lower right hand corner of your frame
13. Copy and paste elems36. Resize and place in front of your tower
14. Copy and paste elems37. Resize and place so that it looks like it is sitting in elems37
15. Copy and paste elems54. Resize and place on the right side of elems36
16. Copy and paste elems23. Place over your image
17. Add your copyright info and text
18. Merge visible and Save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comment.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.
 

 

Shades of Love


             I am using the amazing artwork of Danny Lee
         You can purchase it here: SNC
                    Matching Scrapkit "Red Heart" by Designs by Joan
              You can also purchase it here: SNC


1. Open new image 600 X 600
2. Copy and paste REDHEART65. Resize and place in the middle of your image
3. Grab your magic wand and click inside your frame layer
4. Copy and paste your tube. Duplicate and move orginal under your frame layer
5. On  your orginal tube layer go Selections/ Modify/ Expand by 5/ Invert/ Delete
6. Now on your duplicate layer grab your eraser tool and erase anything that is showing above the frame that you don't

want showing
7. Copy and paste REDHEART8. Resize and place on the left hand side of your frame
8. Copy and paste REDHEART9. Resize and place on the right hand side of your frame
9. Copy and paste REDHEART14. Resize and place in the middle of 8 and 9
10. Copy and paste REDHEART13. Resize and place next to your box
11. Duplicate 13 and place just to the left of the first candy
12. Copy and paste REDHEART67. Place to your liking
13. Add your copyright info and Text
14. Merge Visible and Save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.
 

 

    XOXO


             I am using the amazing artwork of Ismael Rac
      You can purchase it here: Rac
                      Scrapkit "Valentine Time" by MistyLynn's Creations
                      You can also purchase it here: Scrap Candy


1. Open new image 600 X 600
2. Copy and paste element 53. Place in the middle of your image
3. Copy and paste element 41. Resize and place in the lower middle of your image
4. Copy and paste element 60. Resize and place just above your ribbon layer
5. Grab your magic wand and click in the left side of your frame
6. Copy and paste your tube. Resize and place to your liking. Duplicate tube
7. Move your orginal tube under your frame layer and go Selections/Modify/Expand 5/ Invert and delete. Selections none
8. Go to your copy and grab  your eraser tool. Erase the parts of the tube that are showing above your frame layer
9. Grab your magic wand again and click in the right side of your frame
10. Copy and paste your second tube and follow steps 7 & 8
11. Copy and paste element 21. Resize and place just on the right side of the heart on your ribbon
12. Copy and paste element 25. Resize and place in the middle of the right side of your frame
13. Copy and paste element 24. Resize and place in the middle of elements 21 and 25
14. Copy and paste element 36. Reisze and place in front of elements 21 and 24
15. Copy and paste element 57. place in the middle of your image
16. Add your copyright info and Text
17. Merge Visible and save

That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.

 

  Floating Flowers

            I am using the amazing artwork of Jamie Kidd
      You can purchase it here: CDO
         Scrapkit "IB - Pinup Toons" by HungryHill
             You can also purchase it here: CDO



1. Open new image 600 X 600
2. Copy and paste falling hearts. Place in the middle of your image
3. Copy and paste lace heart. Resize to your liking and place in the middle of your image
4. Grab your magic wand and click inside your frame
5. Copy and paste your tube as new layer. Resize to your liking. Duplicate your tube and pull the orginal tube layer under

your frame layer.
6. Make sure that the orginal tube is higlighted. Go Selections/Modify/Expand by 5. Then go Selections/Invert/Delete
7. Highlight your duplicate tube and take your easer tool and erase everything that is showing above the frame layer
8. Copy and paste poodle. Resize to your liking and place on the right hand side of your frame
9. Copy and paste lace-fan. Resize to your liking and place on the left hand side of your frame
10. Copy and paste heart-box. Resize to your liking and place infront of your fan layer
11. Grab your eraser tool and erase the stem that is showing from under the box
12. Copy and paste word art. Resize to your liking and place at the top of your image
13. Add your copyright info and Text
14. Merge visible and Save


That's it..... I hope you have enjoyed my tutorial. If you have any questions please
feel free to leave a message in the Comments.

    This tutorial was written February 2014 by me(Koolbrat) any similarities to another is just a coincidence.